Reset Toner and Drum HP 1500 and 2500

How to Reset Chips for Toner Cartridge and Drum Unit (Image Drum). 
Ref: C9700A, C9701A, C9702A, C9703A. Used in the HP series 1500 and 2500.

HP designs chips to count the rotations of the imaging drum, thus stipulating a page count to end the life of the toner cartridge, forcing the consumer to buy a new cartridge. 
not taking into account the principal: the amount of dust in the cartridge.

Save a fortune with chips and Toner Drum Unit (image drum).

1  Remove the two printer toner cartridges. Example: Black and Yellow. 

2 Remove the chip on black toner cartridge and place the yellow toner 
and chip Yellow Toner put the black cartridge.

3 Place both cartridges in the printer and then turn off for a few seconds.

4 Connect the printer to warning light will illuminate while the other will blink. Press Cancel (red button). The printer should be ready to print.

5 Repeat for the other two toner cartridges.
The same procedures should be performed with the chips of the units Drum.  

Ready!  With these actions, the chip will be "reset" and never need to be replaced . So you save a fortune!

 

Read more »

Reset Lexmark T520, T522, T610, T612, T614, T620, T622, T630, T632, T634, T640, T642, T644.

How to Reset the Maintenance Counter Pages 
Lexmark T520, T522, T610, T612, T614, T620, T622, 
T630, T632, T634, T640, T642, T644.

Lexmark printers have printed pages and provides alerts
for preventive replacement of the maintenance kit.


In addition to resetting the counter you can reset the page counter, 
or even put the number you want.

* For some models may change the keys for Checkmark and right arrow.

1 Turn the printer by pressing [Select] and [Return] 
until the panel "Performing Self Test".
Note : If the panel appears "80 Sechedule Maintenance" 
press [Go] to get to the menu.
2 Press the menu button until panel display 
on the second line "Reset Maint Cnt".
3 Press [Select] in the first line should show 
"Reset Maint Cnt" and the second line "Reset".
4 Press [Select] and off for a few seconds.

Ready ! With this procedure you restarted the maintenance page counter.

Read more »

Okidata Color RESET

This reset is a marvel works in Okidata C3200, C3200N, C3250, C5100, C5150n, C5200, C5250N, C5300, C5400, C5450N, C5500, C5550N.

Okidata color printers have multiple sensors for all your parts and supplies. 

These sensors estimate the lifetime of Toner, Fuser, Imaging Drum (Drum), Belt (Belt), etc..

After passing a pre-defined number of pages the printer outputs an error message and does not print anymore.

1   Turn the printer while holding down the [ Up ] and [ Down ] until " Oki User ".

2  Scroll to "Engine Dialog Mode" press: [ Enter ] will " Diagnostic Mode xx.xx.xx S-Mode " .

3  Scroll to "Initial NV RAM" press: [ Enter ]  will appear  "Table 1 Initial NV RAM " .

4  Aperter [ On Line ] and [ Enter ] to tie and hold display "Executing Reset".

5th  Delisgue the printer for a few seconds.

Ready!

You resetou all toner cartridges, fuser, drum units, all showed 100% again.

Read more »

How to Reload Toner Cartridge Okidata C5500, C5600, C5650N, C5700, C5800, C5900, C6000 and C6100

 The remanufacture a cartridge Okidata C5500, C5600, C5650N (all colored). For those unfamiliar, it becomes a novel. 
It takes several unusual items for HP, Lexmark, we're used to.

The engineering is different from the cartridge.
Cartridges Stater - Those that comes when you buy the printer. 

They are not rechargeable. 

Reason: Not open to the chip.

The Prographi, sells remanufactured cartridges.
The Prographi are not remanufactured starter.

That is, you can reload as many times as you want!

The units drum (Drum) are resettable via a fuse of 0.06 amps.

For a better use of their supplies learn how to reset the count of pages of these printers.

 

Read more »

Reset Color Printer Okidata C5650N and C5600

How to Reset the Drum Unit (Image Drum) Toner Belt, Fuser the Okidata C5600 and C5650N. 

Okidata color printers have multiple sensors for all your parts and supplies. 
These sensors tell the life of Toner, Fuser, Imaging Drum (Drum), Belt (Belt), etc.. After passing a pre-defined amount of pages the printer outputs an error message and does not print anymore. This is used by the manufacturer as a tactic to force the consumer to replace the supply.
Remember your supply is running out and you should rework it or buy a new one.
This is a palliative action for you to continue printing.

Okidata C5650N Colour Laser Printer

1 Turn the printer while holding down the [+] and [-] until "Password" or "Oki User".


2 The Password Maintenance a sequence of six zeros or six "as": [0 0 0 0 0 0] on some printers may be: [aaaaaa].


3 In the [-] go to "Fuse Keep Mode" press [Enter] and hold for 10 seconds and release.


4 Aperter [Enter] and quickly release.


5th then press [Enter] and hold again for 10 seconds, release.


6 Aperter [Enter] and release quickly.


If it works you will see "Initialing" and then "On Line".


Warning
Cartridges Toner (Stater) do not have the opening of the chip for this reason are not rechargeable. We remanufactured toner cartridge! which can be recharged as many times as you want. Drum Units (Stater) those that comes with the printer are NOT resettable! The Reset is accomplished by placing a 0.06 amp fuse. 
If you are having many problems with recharging contact us! And read the article below

Read more »

Reset Drum Drum Sharp AL1530CS, AL1641CS, AL1645CS, AL1655CS, AL1661CS, AL1642CS, and others.

Whether the AL series until 1000 SHARP copiers large, all possess a "maintenance menu" often called the "simulation mode".


 This is a hidden menu, which gives the possibility to reset counters, adjustments machine, to sensors to handle in some cases.


 For models AL1530CS, AL1641CS, AL1645CS, AL1655CS, AL1661CS, AL1642CS, among others.

Tighten sequentially C + Auto, C + Auto panel will erase.
Type 24 and the green key to "enter".
Within Option 24 type 07 and the green button again.


For models with a panel more advanced. 
# + * + C + *

You Tube Video

  

Read more »